|
|
Miter Saw
The CEDE model shop is equipped with a Milwaukee 10” sliding
compound miter saw. This saw is designed to make large straight
and angle cuts to a material. The miter saw uses a disk blade and
is brought down manually to cut the material. Because the rotation
of the blade pushes down on the material being cut, there is
little danger of the material (if properly places and supported on
the table) of being thrown. Therefore, the miter saw may be used
freehand. Maximum cutting height for material while using the
miter saw is 3 inches. The maximum width of a material while using
the miter saw is 6 inches.
|
|
